wepa drebel! saludos efraín!!!
q bien q ya tienes DSL!! aki tengo algunos tips para ti y cualkier usuarios q tenga adsl con "caps" 256/128
Pasos (ESTOS SETTINGS SON SOLO PARA WINDOWS XP):
1. Baja Cablenut. Lo puedes bajar de aki:
http://www.student.ipfw.edu/~gottjl01/f ... nut408.exe
*IMPORTANTE* Recuerde que su meta es conseguir cerca del 90% de su velocidad (256/128) y q este programa no va a obrar maravillas pues hay otros factores a tomar en consideracion como el estado de su linea, lo cerca o no q este a la central , etc.
2.Apunte estos settings en CABLENUT:
DefaultReceiveWindow = 32768
DefaultSendWindow = 16384
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 1024
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 17520
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 17520
MaxConnectionsPer1_0Server = 8
MaxConnectionsPerServer = 4
DefaultTTL = 128
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 252
3.MTU Values: PARA FIJAR EL MTU USE DR.TCP (DSL REPORTS)
El valor de MTU debe fijarse de esta manera (les recomiendo q lo fijen en 1500) :
56K - 1500
Normal DSL - 1500
PPPoE DSL - 1492
XP's software PPPoE DSL - 1480
Cable Modem - 1500
Como Ajustar los properties de su NIC para cable o DSL:
Cable:
1. Right click My Computer - properties - device manager, click the + beside Network Adapters and choose your NIC from the list. Right click on it and select properties - advanced tab, look for a setting called "duplex mode","link speed" or "media type" highlight it and change the value on the right to "10baseT", "10mbs half duplex" or "10mbs" - NOT FULL DUPLEX MODE, then select OK.
DSL (en el caso del ADSL de la PRTC ponganlo en 100baseTfullDuplex) :
1. Right click My Computer - properties - device manager, click the + beside Network Adapters and choose your NIC from the list. Right click on it and select properties - advanced tab, look for a setting called "duplex mode","link speed" or "media type" highlight it and change the value on the right to "10baseT full duplex", "10mbs full duplex" - then select OK.
*note* DSL can be either full or half duplex mode contact your ISP to find out what they support.
When using a router it will decide the proper duplex mode and you should use the highest setting your router supports
Para q sus paginas de internet abran mas rapido:
Navigate to this registry entry and change the following settings:
HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\ServiceProvider
On the right for ALL OS's change these entries: (ALL values are HEXIDECIMAL)
Class = 1
DnsPriority = 1
HostsPriority = 1
LocalPriority = 1
NetbtPriority = 1
To change the value right mouse click on the value and select modify and enter the values above once you have done all of them reboot to take effect and see how fast your pages load.
OTHER IMPORTANT TROUBLESHOOTING TIPS:
1. Open Internet Explorer and select Tools - Internet Options - under the General tab in the Temporary Intenet files section select the Settings button.
Select "Automatically" and set the amount of disk space to use: to no more than 80MB. Now select the Connections tab and select LAN Settings make sure EVERYTHING there is unchecked and select OK.
