Para todas aquellas personas con problemas en el area de DSL. Muchas veces ni ATM, ni Planta tienen la culpa de sus problemas, a veces los problemas estan en sus mismas computadoras.
Me explico; he estado 18 dias sin DSL, nadie se podia explicar por que, sin embargo tenia una leve idea de que era la configuracion de mi modem que estaba media mala, busque la forma de darle reset a el modem a su configuracion original y lo reconfigure como antes que tuviese problemas, le puse mi username y password de coqui.net y ya tengo servicio nuevamente luego de 18 dias.
La proxima vez que tengan problemas busquen la forma de que le pongan el username/password de coqui y los problemas se desaparecen.
-Drebel
¡ Mejora Tu Experiencia Con DSL!
wepa drebel! saludos efraín!!!
q bien q ya tienes DSL!! aki tengo algunos tips para ti y cualkier usuarios q tenga adsl con "caps" 256/128
Pasos (ESTOS SETTINGS SON SOLO PARA WINDOWS XP):
1. Baja Cablenut. Lo puedes bajar de aki:
http://www.student.ipfw.edu/~gottjl01/f ... nut408.exe
*IMPORTANTE* Recuerde que su meta es conseguir cerca del 90% de su velocidad (256/128) y q este programa no va a obrar maravillas pues hay otros factores a tomar en consideracion como el estado de su linea, lo cerca o no q este a la central , etc.
2.Apunte estos settings en CABLENUT:
DefaultReceiveWindow = 32768
DefaultSendWindow = 16384
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 1024
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 17520
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 17520
MaxConnectionsPer1_0Server = 8
MaxConnectionsPerServer = 4
DefaultTTL = 128
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 252
3.MTU Values: PARA FIJAR EL MTU USE DR.TCP (DSL REPORTS)
El valor de MTU debe fijarse de esta manera (les recomiendo q lo fijen en 1500) :
56K - 1500
Normal DSL - 1500
PPPoE DSL - 1492
XP's software PPPoE DSL - 1480
Cable Modem - 1500
Como Ajustar los properties de su NIC para cable o DSL:
Cable:
1. Right click My Computer - properties - device manager, click the + beside Network Adapters and choose your NIC from the list. Right click on it and select properties - advanced tab, look for a setting called "duplex mode","link speed" or "media type" highlight it and change the value on the right to "10baseT", "10mbs half duplex" or "10mbs" - NOT FULL DUPLEX MODE, then select OK.
DSL (en el caso del ADSL de la PRTC ponganlo en 100baseTfullDuplex) :
1. Right click My Computer - properties - device manager, click the + beside Network Adapters and choose your NIC from the list. Right click on it and select properties - advanced tab, look for a setting called "duplex mode","link speed" or "media type" highlight it and change the value on the right to "10baseT full duplex", "10mbs full duplex" - then select OK.
*note* DSL can be either full or half duplex mode contact your ISP to find out what they support.
When using a router it will decide the proper duplex mode and you should use the highest setting your router supports
Para q sus paginas de internet abran mas rapido:
Navigate to this registry entry and change the following settings:
HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\ServiceProvider
On the right for ALL OS's change these entries: (ALL values are HEXIDECIMAL)
Class = 1
DnsPriority = 1
HostsPriority = 1
LocalPriority = 1
NetbtPriority = 1
To change the value right mouse click on the value and select modify and enter the values above once you have done all of them reboot to take effect and see how fast your pages load.
OTHER IMPORTANT TROUBLESHOOTING TIPS:
1. Open Internet Explorer and select Tools - Internet Options - under the General tab in the Temporary Intenet files section select the Settings button.
Select "Automatically" and set the amount of disk space to use: to no more than 80MB. Now select the Connections tab and select LAN Settings make sure EVERYTHING there is unchecked and select OK.
q bien q ya tienes DSL!! aki tengo algunos tips para ti y cualkier usuarios q tenga adsl con "caps" 256/128
Pasos (ESTOS SETTINGS SON SOLO PARA WINDOWS XP):
1. Baja Cablenut. Lo puedes bajar de aki:
http://www.student.ipfw.edu/~gottjl01/f ... nut408.exe
*IMPORTANTE* Recuerde que su meta es conseguir cerca del 90% de su velocidad (256/128) y q este programa no va a obrar maravillas pues hay otros factores a tomar en consideracion como el estado de su linea, lo cerca o no q este a la central , etc.
2.Apunte estos settings en CABLENUT:
DefaultReceiveWindow = 32768
DefaultSendWindow = 16384
DisableAddressSharing = 1
InitialLargeBufferCount = 100
InitialMediumBufferCount = 240
InitialSmallBufferCount = 320
LargeBufferSize = 81920
MaxFastTransmit = 64000
MediumBufferSize = 15040
PriorityBoost = 0
SmallBufferSize = 1280
TransmitWorker = 32
FastSendDatagramThreshold = 1024
EnableFastRouteLookup = 1
EnablePMTUDiscovery = 1
IgnorePushBitsOnReceive = 0
GlobalMaxTcpWindowSize = 17520
MaxFreeTcbs = 8000
MaxHashTableSize = 16384
MaxNormLookupMemory = 5000000
SackOpts = 1
SynAttackProtect = 1
Tcp1323Opts = 0
TcpLogLevel = 1
TcpMaxDupAcks = 3
TcpMaxHalfOpen = 100
TcpMaxHalfRetried = 80
TcpRecvSegmentSize = 1460
TcpSendSegmentSize = 1460
TcpTimedWaitDelay = 30
TcpUseRFC1122UrgentPointer = 0
TcpWindowSize = 17520
MaxConnectionsPer1_0Server = 8
MaxConnectionsPerServer = 4
DefaultTTL = 128
DisableUserTOSSetting = 0
TcpMaxDataRetransmissions = 6
DefaultTOSValue = 252
3.MTU Values: PARA FIJAR EL MTU USE DR.TCP (DSL REPORTS)
El valor de MTU debe fijarse de esta manera (les recomiendo q lo fijen en 1500) :
56K - 1500
Normal DSL - 1500
PPPoE DSL - 1492
XP's software PPPoE DSL - 1480
Cable Modem - 1500
Como Ajustar los properties de su NIC para cable o DSL:
Cable:
1. Right click My Computer - properties - device manager, click the + beside Network Adapters and choose your NIC from the list. Right click on it and select properties - advanced tab, look for a setting called "duplex mode","link speed" or "media type" highlight it and change the value on the right to "10baseT", "10mbs half duplex" or "10mbs" - NOT FULL DUPLEX MODE, then select OK.
DSL (en el caso del ADSL de la PRTC ponganlo en 100baseTfullDuplex) :
1. Right click My Computer - properties - device manager, click the + beside Network Adapters and choose your NIC from the list. Right click on it and select properties - advanced tab, look for a setting called "duplex mode","link speed" or "media type" highlight it and change the value on the right to "10baseT full duplex", "10mbs full duplex" - then select OK.
*note* DSL can be either full or half duplex mode contact your ISP to find out what they support.
When using a router it will decide the proper duplex mode and you should use the highest setting your router supports
Para q sus paginas de internet abran mas rapido:
Navigate to this registry entry and change the following settings:
HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\ServiceProvider
On the right for ALL OS's change these entries: (ALL values are HEXIDECIMAL)
Class = 1
DnsPriority = 1
HostsPriority = 1
LocalPriority = 1
NetbtPriority = 1
To change the value right mouse click on the value and select modify and enter the values above once you have done all of them reboot to take effect and see how fast your pages load.
OTHER IMPORTANT TROUBLESHOOTING TIPS:
1. Open Internet Explorer and select Tools - Internet Options - under the General tab in the Temporary Intenet files section select the Settings button.
Select "Automatically" and set the amount of disk space to use: to no more than 80MB. Now select the Connections tab and select LAN Settings make sure EVERYTHING there is unchecked and select OK.
rEnAkUaJo
2. Select the Privacy tab and choose Advanced check the box "Override automatic cookie handling" and for First-party Cookies - Accept, Third-party Cookies - Block and check "Always allow session cookies. Now NO MORE SPYWARE COOKIES.
3. Another thing to do about once a week if you modem is on 24/7 is to power cycle your modem, just completely disconnect power from it for atleast 15 seconds and then power it back on.
4. Delete your temporary internet files regularly.
5. By default Windows 2K & XP cache everything in the DNS cache service, both correct and faulty DNS lookups. To increase performance by eliminating the caching of faulty DNS lookups add the following to your registry:
HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Dnscache\\Parameters
"NegativeCacheTime"=dword:00000000
"NetFailureCacheTime"=dword:00000000
"NegativeSOACacheTime"=dword:00000000
6. Always connect your modem via ethernet (Network Interface Card) instead of USB, ethernet is faster and much more stable. Also ALWAYS make sure you have the latest drivers for your NIC from the manufacturer NOT Microsoft, alot of times the drivers from the manufacturer have advanced settings that help optimize the performance of your NIC that the native Microsoft drivers don't have.
7. Download and update then do a scan with SpyBot, anything checked in red is spyware and safe to remove.
8. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.
9. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
3. Another thing to do about once a week if you modem is on 24/7 is to power cycle your modem, just completely disconnect power from it for atleast 15 seconds and then power it back on.
4. Delete your temporary internet files regularly.
5. By default Windows 2K & XP cache everything in the DNS cache service, both correct and faulty DNS lookups. To increase performance by eliminating the caching of faulty DNS lookups add the following to your registry:
HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Dnscache\\Parameters
"NegativeCacheTime"=dword:00000000
"NetFailureCacheTime"=dword:00000000
"NegativeSOACacheTime"=dword:00000000
6. Always connect your modem via ethernet (Network Interface Card) instead of USB, ethernet is faster and much more stable. Also ALWAYS make sure you have the latest drivers for your NIC from the manufacturer NOT Microsoft, alot of times the drivers from the manufacturer have advanced settings that help optimize the performance of your NIC that the native Microsoft drivers don't have.
7. Download and update then do a scan with SpyBot, anything checked in red is spyware and safe to remove.
8. Under your LAN connection - properties - general tab, uninstall all the protocols there that you do not need.
9. Open IE and select tools - internet options - connections - LAN settings, make sure NOTHING there is checked.
rEnAkUaJo
10. Make sure you have the latest drivers for your NIC from the manufacturer.
11. Asegurese de limpiar regularmente sus Internet Temp Files
12. Apagues su modem. Si no lo hace diario, hagalo al menos cada 15 días.
13. Ademas de Spybot , puede utilizar solamente o en conjunto Ad-Aware 6. Ya la version gratis salio.
*RECUERDEN QUE LOS SETTINGS DE CABLENUT ARRIBA MENCIONADOS SON SOLO PARA WINDOWS XP & 2000* *PARA OTRAS VERSIONES DE WINDOWS LOS SETTINGS SON DISTINTOS*
*SI NO SE SIENTE COMODO EDITANDO EL REGISTRO, SIMPLEMENTE NO LO HAGA*
MUCHAS GRACIAS A MNOSTEELE POR PROVEER LOS SEETINGS PARA CABLENUT Y A LOS FOROS DE TWEAKXP
QUE LOS DISFRUTES!!!!
11. Asegurese de limpiar regularmente sus Internet Temp Files
12. Apagues su modem. Si no lo hace diario, hagalo al menos cada 15 días.
13. Ademas de Spybot , puede utilizar solamente o en conjunto Ad-Aware 6. Ya la version gratis salio.
*RECUERDEN QUE LOS SETTINGS DE CABLENUT ARRIBA MENCIONADOS SON SOLO PARA WINDOWS XP & 2000* *PARA OTRAS VERSIONES DE WINDOWS LOS SETTINGS SON DISTINTOS*
*SI NO SE SIENTE COMODO EDITANDO EL REGISTRO, SIMPLEMENTE NO LO HAGA*
MUCHAS GRACIAS A MNOSTEELE POR PROVEER LOS SEETINGS PARA CABLENUT Y A LOS FOROS DE TWEAKXP
QUE LOS DISFRUTES!!!!
rEnAkUaJo
Hola amigos tanto time hehe por fin un buen lugar de post positivos "keep it up" bueno saludos y los dejo que este programita ya me esta dando hemoroides celebrales 
The Truth Is Out There, So Dont Trust Anyone! You Can Trust Me On That One! <*´¨´)
¸.·´¸.·´¨) ¸.·*¨)
(¸.·´ (¸.·´ .·´
(¸.·*->-._.-LowFormat-._.¸¸.´¯`·.
¸.·´¸.·´¨) ¸.·*¨)
(¸.·´ (¸.·´ .·´
(¸.·*->-._.-LowFormat-._.¸¸.´¯`·.
PARA LOS Q TENGAN W98 & ME AQUI TIENEN LOS SETTINGS A ESCRIBIR EN CABLENUT:
BcastNameQueryCount - 1
BcastQueryTimeout - 100
BSDUrgent - 1
CacheTimeout - 600000
DefaultRecvWindow - use the calculator to find your best value*
DefaultTTL - 64
EnableDNS - 0
GlobalMaxTcpWindoSize - use the calculator to find your best value*
KeepAliveInterval - 500
KeepAliveTime - 14400000
Lanabase - 0
LocalCopyMade - 1
MaxConnections - 64
MaxConnectRetries - 5
MaxDataRetries - 99
NameTableSize - 255
NameSrvQueryTimeout - 100
PMTUBlackHoleDetect - 0
PMTUDiscovery - 1
RoutingBufSize - 146432
RoutingPackets - 100
SackOpts - 1
SessionKeepAlive - 7200
SessionTableSize - 255
Size/Small/Medium/Large - 3
Tcp1323Opts - 0 (set to 1 if DefaultRecvWindow is 65535 or higher)
TcpTimedWaitDelay - 30
MaxDupAcks - 2
DefaultTOS - 92
IGMPLevel - 2
MaxConnectionsPer1_0Server - 20
MaxConnectionsPerServer - 10
98 & 98SE users need the vtcp.386 patch -
http://dslnuts.com/patch/236926usa8.exe
*CALCULATOR - http://www.dslnuts.com/bitsbytes.shtml
DISFRUTENLO!!!
BcastNameQueryCount - 1
BcastQueryTimeout - 100
BSDUrgent - 1
CacheTimeout - 600000
DefaultRecvWindow - use the calculator to find your best value*
DefaultTTL - 64
EnableDNS - 0
GlobalMaxTcpWindoSize - use the calculator to find your best value*
KeepAliveInterval - 500
KeepAliveTime - 14400000
Lanabase - 0
LocalCopyMade - 1
MaxConnections - 64
MaxConnectRetries - 5
MaxDataRetries - 99
NameTableSize - 255
NameSrvQueryTimeout - 100
PMTUBlackHoleDetect - 0
PMTUDiscovery - 1
RoutingBufSize - 146432
RoutingPackets - 100
SackOpts - 1
SessionKeepAlive - 7200
SessionTableSize - 255
Size/Small/Medium/Large - 3
Tcp1323Opts - 0 (set to 1 if DefaultRecvWindow is 65535 or higher)
TcpTimedWaitDelay - 30
MaxDupAcks - 2
DefaultTOS - 92
IGMPLevel - 2
MaxConnectionsPer1_0Server - 20
MaxConnectionsPerServer - 10
98 & 98SE users need the vtcp.386 patch -
http://dslnuts.com/patch/236926usa8.exe
*CALCULATOR - http://www.dslnuts.com/bitsbytes.shtml
DISFRUTENLO!!!
rEnAkUaJo
-
GunBLADE
- Miembro Sr.
- Posts: 50
- Joined: Thursday,30-Jan-2003 12:05 am
- Location: Santurce,Villa Palmeras
jojojo sigo viendo las indirectas.... anyway me da igual...yo ya habia dejado claro. asi de valientes son........pero pues que se puede hacer dicen basta y le siguen dando fueguito.........
IM COOL, so u do the same thing......
aer aer si alguno de ustedes le da uso a su modem
#2(SiS 900 PCI Fast Ethernet Adapter - Packet Scheduler Miniport (100Mb/s) 6710.10MB In, 2669.44MB Out)) Uptime: (2d 1h 13m 47s)
IM COOL, so u do the same thing......
aer aer si alguno de ustedes le da uso a su modem
#2(SiS 900 PCI Fast Ethernet Adapter - Packet Scheduler Miniport (100Mb/s) 6710.10MB In, 2669.44MB Out)) Uptime: (2d 1h 13m 47s)
Why do you yearn live knowing everything will die??
Why do you build knowing destruction its inevitable??
Why do you build knowing destruction its inevitable??